3 reasons lead to damage to the motherboard of your device

3 min read

3 reasons lead to damage to the motherboard of your device

 

Computers, like any electronic device in this world, lose their efficiency with time and break down if they are too long. On the other hand, the Motherboard or the motherboard is the most important part of your device, and anything that affects it affects your device. Therefore, you always have to take care of the motherboard and repair it first, and you also have to Know the factors that affect your device or its motherboard in order to avoid them and ensure that your device remains working efficiently for as long as possible, for this in this topic we will mention 3 errors that may damage or ruin your motherboard with some solutions that you can follow, for this You have to beware of it.

 

3 reasons lead to damage to the motherboard of your device

1. High temperature:

 

The most common reason, which includes all electronic devices and makes them lose their efficiency, is the high temperature, especially in the summer, and even that it does not only include the motherboard, but any part of the device. The temperature of the device is too high and has become unusual, as you will feel very hot air coming out of your device, in addition to feeling very hot when touching it. Here is the problem and you have to fix it before your device breaks down, in order to actually make sure that the temperature is higher than necessary. You can use some programs that tell you if it is The temperature of the device is normal or not, including:

HWMonitor

Speccy

Core Temp

You can download any one of these programs, run it, and know the temperature, and if you are high, then you have these solutions that prepare you to get rid of the temperature.

 

some solutions :

 

Cleaning the processor fan and even the motherboard from dust, because with time you will find that your device has become covered with dust and impurities, and this is what reduces its efficiency and makes your device slow and its temperature rise, so you must always clean your device.

Make sure to place it away from the sun and in a place that has good ventilation.

Make sure to change the thermal paste as soon as it is simply a paste that is placed on top of the processor to help lower its temperature.

Using an additional fan helps to reduce the temperature of the computer.

These solutions benefit desktop and mobile devices, and if the problem persists even after using these solutions, you should take your device to the maintenance center.

 

2. Electrical oscillations:

 

This problem is repeated a lot, especially in the Arab countries, as all of them suffer from weak or lack of electricity generation, which causes frequent interruptions of electricity, which may result in a sudden change in the electrical voltage. This type of problem is very difficult, and I suffered from it personally, as it caused the burning of one of my previous devices.

 

some solutions :

Try to buy a surge protector, which is a device that protects against sudden electricity changes. Its price is about $10.

Try to turn off the computer completely when thunderstorms occur or when there are frequent power outages.

3. Wrong installation of your hardware:

 

Sometimes while installing internal parts for your devices such as RAM or even graphics cards or any other pieces, sometimes you may not install them properly in their correct place and when the device is turned on, it will cause damage to the motherboard.

 

some solutions :

 

Always make sure to install the pieces in place.

Or it is better to take the device to a technical repairer that you have confidence in and install it.

Also, make sure to install the motherboard and wires well, and also do not touch any piece inside the motherboard if you do not have experience with the devices. 

You may like these posts

Post a Comment